SUMITOMO CF-1071 Simplex Cable Assemblies, JIS F05 H-PCF Cable Assemblies
JIS F05 (SGK-SO1-L1-220/230) HCS/PCF optical fiber connector/patch cord
H-PCF 200/230um Fiber, Wear Resistant PUR Jacket, OD 6.0mm, Simplex, Length is from 0.5 to 120M. Manufactured by FEV ELECTRONICS COMPANY. Available in a variety of lengths.
JIS F05 is a simplex PCF optical fiber connector developed in Japan, which can be matched with PCF optical fiber transceivers such as Toshiba and SUMITOMO. It is widely used in Mitsubishi Electric MR-J3-B servo SSCNET system, PLC system, Hitachi driling machine, SYSMAC system, elevator control system, placement machine and other industrial systems and servo numerical control systems.
Use case: Mitsubishi Electric MR-J3-B servo SSCNET system, PLC system, Hitachi drilling machine, SYSMAC system, elevator control system, placement machine and other industrial systems
CHANGZHOU FEV Electronics produces kinds of optical fiber cables with fiber optic connectors as below:
(1) Crimp & cleave optical connector (for on-site assembly)
Applicable size: JIS F05: CF-1071, CF-1571
JIS F07: CF-1571
Tool: CAK-0057-EX
Reference fiber: CAT-1001H, CAT-2001H
Inline adapter: IAT-4000x1
(: H-PCF connectors and tools for on-site assembly.jpg )
(2) Glue & polish connectors (for factory preassembly)
Applicable size: JIS F05: CF-1001H, CF1501H
JIS F07: CF-2071H, CF-2001H, CF-2071TE*2
Reference fiber: CAT-1001H, CAT-2001H
Inline adapter: IAT-4000x1
(: Glue and polish connectors for factory preassembly)
APPLICATIONS OF SUMITOMO CF-1001 OPTICAL FIBER CABLE:
1. Industrial automation control system
2. Industrial robot system and servo system
3. Easy to install and connect without maintenance.
4. Digital multimedia systems
5. Medical sensor system
6. Compliance with Profibus, Interbus, ControlNet and SERCOS standards
7. Data transmission and industrial automation and bus systems
8. Industrial robots, intelligent system and servo system
9. Communication exchange systems
10. Digital multimedia systems
11. Medical sensing system
12. Power system, etc.
13. Telecommunication networks
14. Local area networks (LANs)
15. Data processing networks
16. Wide area networks (WANs)
17. Industrial, medical
KEY FEATURES of SUMITOMO CF-1001:
-Anti-electromagnetic interference and electromagnetic radiation
-Good flexibility, anti-vibration, ensure that in any case zero bit error rate of transmission
-High temperature and low temperature(-40 to 70)
-Easy to install, needless of maintenance
-Plastic optical fiber is not conductive, can share the power transmission pipeline
-Long-range power supply
-Accord with the Agilent universal
-RoHS Compliance
- Light in weight; energy saving and safe;
- High bandwidth; excellent flexibility; vibration resistance;
- Anti-electromagnetic interference; stable and reliable signal transmission;
- Easy to install and connect; maintenance easily;
- Medical Sensing System
- Power system, etc.
Optical fiber Cable:
Optical fiber cable consists of two parts. The center is called the core, the
outer layer is called the cladding. The refractive index of the core is higher
than that of the cladding. The effect of this arrangement is that when an
optical ray is propagated at an angle to the axis of the cable, it is reflected
back at the boundary between the core and the cladding, and thereby
transmitted longitudinally through the core.
There are three kinds of optical fiber:
a) All-plastic fiber (APF)
b) Plastic-cladding silica Fiber (PCF)
c) Silica fiber
APF is used for short-distance data transmission. Both the core and the
cladding are made of plastic. PCF, which is used for middle distance
transmission, has silica core and plastic cladding.Silica fiber is used for longdistance transmission. Both the core and the cladding are made of silica.
TOSLINK devices can be classified as follows:
Optical Modules:
Gerneral Purpose: Simplex(JIS F05) and Duplex (JIS F07), for APF and PCF.
Medium Speed Data Transmission: Simplex(JIS F05) and Duplex (JIS F07), for APF and PCF.
Ceramic Package Modules: Simplex(JIS F05) and Duplex (JIS F07, PN), for APF and PCF.
High Speed Data Transmission: Duplex (SMI, PN), for APF.
Digital Audio: Simples (JEITA RC-5720 square style), For APF
Fiber-Optic Connectors for Optical Fiber Cable:
Simplex(F05) and Duplex(F07), Snap in and Clip, for APF and PCF.
Connectors for Optical Fiber Cable:
Simplex(F05) and Duplex(F07), Snap in and Clip, for APF and PCF.
Optical Fiber Cables:
Simplex and Duplex for APF and PCF.
Application examples of TOSLINK:
TOSLINK is used in a wide variety of applications, such as digital audio and factory automation.
1, Factory automation (FA);
2, Industry control;
3, For CNC control replacement, CNC controller, Evlevator, server, printed machine
4, Digital audio;
5, Car audio and navigation system;
6, Office automation (OA);
TOSHIBA TOCP80, TOCP100, TOCP100Q, TOCP100X, TOCP150, TOCP150Q, TOCP150X, TOCP151, TOCP151Q, TOCP151X, TOCP155, TOCP155P, TOCP172, TOCP172B, TOCP172-XXB, TOCP200, TOCP200K, TOCP200P, TOCP200X, TOCP200XXB, TOCP201, TOCP201Q, TOCP201X, TOCP255, TOCP255B, TOCP255P, TOCP 172, F05 Toshiba original optical fiber cable for replacement. We can produce the TOCP Optical Fiber cable from 0 to 100 Meters. TOCP Optical Fiber Cable for CNC controller. TOCP155 Toshiba, TOCP 200 Toshiba, TOCP 255 Toshiba, Toshiba Cable, Toshiba CNC, Toshiba CNC Controller, Toshiba Optical Cable. Toshiba Wiring Devices.
Audited Supplier 
){kind=link}